Personal Profile:
Li Changping, born in May 1990, native of Changde, Hunan, associate professor, master supervisor, has successively presided over many projects such as special subject of National Key Research and Development Program, the Youth Program of National Natural Science Foundation of China, program supported by the Fundamental Research Funds for the Central Universities, the Teaching and Research Project of the Ministry of Education, and the projects commissioned by enterprises and institutions, and has also participated in the general program of the National Natural Science Foundation of China, and provincial key R&D and transformation programs as the main research or participant. He is mainly committed to the research of intelligent geological equipment, machine learning, deep learning, intelligent control algorithm and electromechanical product design, and has published more than SCI papers as the first author and corresponding author, and serves as the reviewer of many journals such as International Journal of Rock Mechanics and Mining Sciences, Journal of Petroleum Science and Engineering and ROCK MECHANICS AND ROCK ENGINEERING.
Contact Information:
Office location: Room 325 (No. 2 Teaching Building), School of Mechanical Engineering and Electronic Information, Nanwangshan Campus, China University of Geosciences
Email: lichangpingcug@126.com
Main Experience:
2015/07-present: Assistant Engineer, lecturer and associate professor at the School of Mechanical Engineering and Electronic Information, China University of Geosciences (Wuhan)
2017/09-2020/12: PhD, Department of Control Science and Engineering, School of Automation, China University of Geosciences (Wuhan)
2012/09 -2015/06: Master, Mechanical Engineering, School of Mechanical Engineering and Electronic Information, China University of Geosciences (Wuhan)
2008/09 -2012/06: Bachelor, Mechanical Design and Manufacturing and its Automation, School of Mechanical Engineering and Electronic Information, China University of Geosciences (Wuhan)
Main Research Fields:
Intelligent geological equipment: intelligent and efficient drilling equipment, automation and intelligence of geological equipment, green design and manufacturing of geological equipment
Automation and artificial intelligence: machine learning, deep learning, intelligent control algorithms, industrial control, electromechanical product design
Longitudinal tasks as the PI or participant:
1. Special subject of National Key Research and Development Program, “Emergency collaborative control and intelligent decision-making of XX system”, 2023/12-2026/11, under study, PI
2. Youth Program of National Natural Science Foundation of China, “Study on the rock breaking mechanism by high voltage electric pulse in aqueous medium- taking granite as an example, 2021/01-2023/12, concluded, PI
3. Laboratory Open Fund Project of the Key Laboratory for Drilling and Production Engineering of Hubei Province, “Research on the joint simulation platform for prediction of high voltage electric pulse rock breaking and optimization of process parameters”, 2022/04-2024/04, concluded, PI
4. Laboratory Open Fund Project of the Engineering Research Center of Rock-Soil Drilling Excavation and Protection, Ministry of Education, “Research on the prediction model of rock-breaking process by high-voltage electric pulse based on thermal coupling effect”, 2022/06-2024/06, concluded, PI
5. Industry-University-Research Collaborative Education Project of the Ministry of Education in 2023, “Advanced Perception and IoT Technology Teacher Training under the Background of Ideological and Political Education in All Courses”, under study, PI
6. Industry-University-Research Collaborative Education Project of the Ministry of Education in 2020, “Construction of "virtual-real" practical teaching platform for mechanical design and manufacturing and automation”, concluded, PI
7. Program supported by the Fundamental Research Funds for the Central Universities, “Research and development of tunnel lining concrete defect detection system”, 2016/01-2017/12, concluded, PI
8. General Program of the National Natural Science Foundation of China, “Research on the rock breaking process and prediction model of high-voltage electric pulse drill bits with different structures”, 2023/01-2026/12, under study, top 3
9. Project supported by Key R&D and Transformation Program of Qinghai Province, “Development of the drilling mud intelligent purification and allocation system of green exploration vehicle hydrological well”, 2020/01-2022/12, concluded, participant
10. Program supported by Qinghai Bureau of Environmental Geology Exploration, “Research on the development and application of automatic mud circulation purification device for hydrogeological drilling of green exploration”, 2018/12-2019/12, concluded, major researcher
Crosswise tasks as the PI or participant:
1. CNPC Offshore Engineering Company Limited, “XX signal wireless transmission simulation test”, 2024/03-2024/12, concluded, PI
2. Enterprise sponsored program supported by Hunan Zhurong Smart Fire Protection Technology Co., Ltd, “Development of Intelligent IOT and Remote Operation and Maintenance System for Vehicle-mounted Fire Extinguisher Overhauling”, 2024/09-2024/12, concluded, PI
3. Enterprise sponsored program supported by Hunan Zhurong Smart Fire Protection Technology Co., Ltd, “Development of Intelligent IoT Measurement and Control System for Maintenance of Vehicle Fire Fighting Equipment”, 2024/06-2024/08, concluded, PI
4. Enterprise sponsored program supported by Hunan Zhurong Smart Fire Protection Technology Co., Ltd, “Development of Intelligent IoT System for Diagnosis of Vehicle Fire Fighting Equipment”, 2023/06-2023/09, concluded, PI
5. Enterprise sponsored program supported by China Nuclear Power Operation Technology Corporation Limited, “XX Valve Fault Identification Algorithm and Model Development”, 2023/01-2023/12, concluded, PI
6. Enterprise sponsored program supported by Tianjin Premier ESP Pumping System Co., LTD, “Dynamics analysis of XX pump unit and XX pipeline”, 2023/03-2023/11, concluded, PI
7. Enterprise sponsored program supported by Wuhan Dida Huarui IOT Technology Co., Ltd., “Mechanical system design of vehicle-mounted intelligent testing equipment”, 2022/04-2023/04, under study, PI
8. Enterprise sponsored program supported by Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou), “Underwater steady state analysis of wellhead suction module”, 2022/04-2022/08, concluded, PI
9. Project supported by Key R&D and Transformation Program of Qinghai Province, “Development of the drilling mud intelligent purification and allocation system of green exploration vehicle hydrological well”, 2020/01-2022/12, concluded, participant
10. Program supported by Qinghai Bureau of Environmental Geology Exploration, “Research on the development and application of automatic mud circulation purification device for hydrogeological drilling of green exploration”, 2018/12-2019/12, concluded, major researcher
Selected Papers:
1. Liu Xianao, Longchen Duan, Changping Li*(corresponding author), Jifeng Kang, Di Zhang. Simulation and Experimental Study on the Rock-Breaking Process Induced by High-Voltage Electric Pulse[J].Rock Mechanics and Rock Engineering, 2024, :1-21. (SCI/EI).
2. Longchen Duan, Liu Xianao, Changping Li*(corresponding author), Jifeng Kang, Di Zhang. Research on the Effects of an Electrode Drill Bit during the Rock Drilling Process by High-Voltage Electric Pulse[J].SPE Journal , 2024. (SCI/EI).
3. Changping Li, Wenjian Yang. Prediction model of high-voltage pulse boring rock-breaking process and intelligent identification of model parameters [J]. Journal of Petroleum Science and Engineering, 2022, 210: 110066.(SCI/EI).
4. Longchen Duan, Yibiao Xiao, Changping Li*(corresponding author), Ao Li, Jifeng Kang. Simulation and Experimental Study on the Influence of Bit Structure On Rock-Breaking by High-Voltage Electro-Pulse Boring[J]. Journal of Petroleum Science and Engineering, 2022, 214:110556. (SCI/EI).
5. Changping Li, Longchen Duan, Jifeng Kang, Ao Li, Yibiao Xiao. Experimental investigation on rock-breaking by high-voltage electro-pulse boring [J]. Journal of Energy Resources Technology, 2022, 144:123009. (SCI/EI)
6. Changping Li, Longchen Duan, Jifeng Kang, Ao Li, Yibiao Xiao, Victor Chikhotkin. Weight analysis and experimental study on influencing factors of high-voltage electro-pulse boring [J]. Journal of Petroleum Science and Engineering, 2021, 205: 108807. (SCI/EI).
7. Changping Li, Longchen Duan, Laijie Wu, Songcheng Tan, Jun Zheng, Victor Chikhotkin. Optimization of discharge circuit model based on electro pulse boring experiment[J]. Journal of Natural Gas Science and Engineering, 2021, 86: 103730. (SCI/EI).
8. Changping Li, Longchen Duan, Laijie Wu, Songcheng Tan, Jun Zheng, Victor Chikhotkin. Experimental and Numerical Analyses of Electro-Pulse Rock-Breaking Drilling [J]. Journal of Natural Gas Science and Engineering. 2020, 77: 103263. (SCI/EI).
9. Changping Li, Longchen Duan, Songcheng Tan, Victor Chikhotkin. Damage Model and Numerical Experiment of High-Voltage Electro Pulse Boring in Granite[J]. Energies. 2019, 12(4): 727. (SCI/EI).
10. Changping Li, Longchen Duan, Songcheng Tan, Victor Chikhotkin, Xiaohui Wang. An Electro Breakdown Damage Model for Granite and Simulation of Deep Drilling by High-Voltage Electropulse Boring[J]. Shock and Vibration. 2019, 2019. (SCI/EI).
11. Changping Li, Longchen Duan, Songcheng Tan, Victor Chikhotkin. Influences on High-Voltage Electro Pulse Boring in Granite[J]. Energies. 2018, 11(9): 2461. (SCI/EI).
12. Li Changping, Chikhotkin Victor, Duan Longchen. Research Progress of Electro Pulse Boring Rock Breaking Technology[J].Geological Science and Technology Information.37(06): 304-310.
13. Xiao Yibiao, Li Changping* (corresponding author), Duan Longchen, Kang Jifeng, Li Ao. Research on rock breaking process based on high voltage electric pulse rock breaking damage model[J]. Bulletin of Geological Science and Technology, 2023, 42(03): 323-330.
14. Li Changping, Duan Xiudong, Ding Tengfei, Huang Yunhao. The design and implementation of control system for automatic feeding and cutting device[J].Manufacturing Automation2017,39(10): 114-116. (Teaching research paper)
15. Li Changping, Yang Yang, Ding Tengfei. Application of SIEMENS simulation software in NC machine practice teaching[J]. Laboratory Science, 2017, 20(03): 60-64. (Teaching Research Paper)
16. Kong Erwei, Li Ao, Zeng Shiyou,Duan Longchen, Zhang Feng, Li Changping* (corresponding author). Simulation of rock breaking test by high voltage electric pulse discharge based on Selfrag [J]. Drilling Engineering, 2021,48(08):40-46.
17. Liang Li, Xiao Yibiao, Li Dapeng, Duan Longchen, Zhang Feng, Li Changping* (corresponding author).Development of a high voltage electric pulse rock breaking experiment device[J].Drilling Engineering,2021,48(11):76-82.
18. Yang Yang, Li Changping. Design of High Voltage Pulse Power Supply for Electric Pulse Rock Breaking Experiment [J]. Power Electronics, 2021,55(03):55-57.
19. Li Changping, Gao Jiawei, He Xin. Research and Practice of Virtual-real Combination Experimental Teaching System for Complex Assembly [J]. Research and Exploration in Laboratory, 2023, 42(08):176-179+205.
Representative Granted Patents:
1. Nondestructive testing device for tunnel lining, invention patent, granted, grant No.: ZL 201610854251.5 [Invention patent, ranking first]
2. An automatic sawing and blanking control system for bow-saw machine, invention patent, granted, grant No.: ZL 201710172164.6 [Invention patent, ranking first]
3. A multi-electrode pair electric crushing drill and electric crushing experimental device, invention patent, acceptance No.: 201810057146.8 [Invention patent, ranking first]
Students’ Awards in Competitions:
As the first instructor, he guided students to participate in the National Undergraduate Engineering Training Integration Ability Competition, and National Advanced Graphic Skills and Innovation Competition (two National Third Prize, one Provincial First Prize and one Provincial Third Prize), “Siemens Cup” China Intelligent Manufacturing Challenge (2 Provincial Second Prizes and 1 Provincial Third Prize) and National College Mechanical Innovation Competition (1 Provincial Second Prize)
Honors:
2020: Honorary Title of “Advanced Individual Against COVID-19” by China University of Geosciences (Wuhan)
Excellent Project Case of the Industry-University-Research Collaborative Education Project of the Ministry of Education in 2022.
