Personal Resume
Name: Jiang Hongyong, distinguished professor, CUG Scholar/Youth Talent Program
Native place: Loudi City, Hunan Province
Address: Room 625 (No. 2 Teaching Building), School of Mechanical Engineering and Electronic Information, China University of Geosciences (Wuhan), No. 388 Lumo Road, Hongshan District, Wuhan City, Hubei
Contact Information:
Email: jianghy@hnu.edu.cn
WeChat: w369801581
Google Scholar homepage: https://xs2.zidianzhan.net/citations?user=yh0K9cwAAAAJ&hl=zh-CN&oi=ao
Basic Information:
Jiang Hongyong, distinguished professor, PhD/postdoctoral fellow, CUG Scholar, CUG Youth Talent Program, Jiangsu Yellow Sea Pearl Talent, member of Chinese Society of Theoretical and Applied Mechanics, member of Chinese Society for Composite Materials, has been carrying out teaching and research work in the fields of aerospace, new energy vehicles, sea geological resources exploration and development equipment, and 3D printing robots, including lightweight point structure/composite structure mechanics and topology optimization design, intelligent additive manufacturing and design, engineering mechanics and simulation modelling. He has presided over or participated in the projects supported by the first-class grant for general program of China Postdoctoral Science Foundation, general program of the Natural Science Foundation of Guangdong Province, Guangdong-Shenzhen Joint Fund Program of the Natural Science Foundation of Guangdong Province, project supported by the State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, research program for Young Top Talents of China University of Geosciences, Hubei Postdoctoral Innovation Research Project, Research Innovation Project of Hunan Province, program of the National Natural Science Foundation of China (Innovative Research Group Program: “Automotive crash safety analysis and optimal design” (Prof. Han Xu), general program youth program), subproject of National Key R&D Program, project of China Aircraft Strength Research Institute, project of Chinese Aeronautical Establishment, national defense basic product innovation research project of the Ministry of Industry and Information Technology and cooperation projects with military industry units and enterprises. In recent years, he has published more than 50 papers in SCI/EI academic journals (including: more than 30 papers as the first author or sole corresponding author, highly cited papers, TOP journals, more than 900 total citations, and Google Scholar H-index of 19), such as Composites Science and Technology, Composites Part B, Composite Structures, International Journal of Mechanical Sciences, Thin-Walled Structures, International Journal of Damage Mechanics, Chinese Journal of Aeronautics, Chinese Journal of Theoretical and Applied Mechanics, Acta Aeronautica ET Astronautica Sinica and Acta Materiae Compositae Sinica, and has applied for 4 national invention patents. He serves as a young editorial board member of SCI/EI journals such as Journal of Aeronautical Materials, Journal of Materials Engineering, Journal of Central South University and J. Cent. South. Univ., the guest editor of Aerosp., Front. in Mech. Eng. and other journals, a member of the Mechanical Engineering Expert Committee for VISER Database, as well as the review expert of many domestic and international academic journals, such as Compos. Sci. Technol., Compos. Part B., Compos Struct., Int. J. Mech. Sci., and Thin. Wall. Struct.
Admission Information:
The team is an “Advanced Design and Additive Manufacturing Group”. The laboratory is equipped with all kinds of 3D printer equipment and testing equipment and virtual simulation equipment, and thus we can provide students with a good experimental and simulation platform. Students who love scientific research and are highly motivated to study are welcome to join us. Undergraduate, postgraduate and PhD students who are interested in the following research directions or related research directions and have related professional backgrounds (e.g., mechanical, mechanics, materials, aerospace, civil engineering, etc.) to join us. We will provide good conditions for scientific research and one-on-one guidance, support the participation in domestic and international academic conferences, recommend for doctoral studies in double first-class 985 universities, and recommend to study abroad for CSC or joint training.
Main Experience:
May 2021- present: Distinguished professor, Department of Mechanical Engineering, School of Mechanical Engineering and Electronic Information, China University of Geosciences
September 2019- October 2020: Department of Mechanical Engineering, College of Engineering, University of Western Australia; Supervisor: Prof. Hu Xiaozhi (Chang Jiang Scholar)
September 2017 - April 2021: PhD in Mechanical Engineering, State Key Laboratory for Automotive, College of Mechanical and Vehicle Engineering, Hunan University; Supervisor: Prof. Ren Yiru
September 2015- June 2017: Master in Vehicle Engineering, State Key Laboratory for Automotive, College of Mechanical and Vehicle Engineering, Hunan University; Supervisor: Prof. Ren Yiru
Courses Offered:
3D Printing Manufacturing Technology (Special Subject in Composite Structural Design and Additive Manufacturing)
Research Interests:
Research background: aerospace and new energy vehicles, 3D printing robots, deep-sea geological resources exploration and development equipment.
Advanced Design: Dot matrix structures, carbon fiber/aramid hybrid composite structure, sandwich structure, involving lightweight design, impact resistance design, durability design, topology optimization design, interface toughening design, heterogeneous component connection design.
Intelligent additive manufacturing and technology: 3D printing of continuous fiber composite material structures, 3D/4D printing of superstructure/intelligent structures.
Engineering mechanics: Finite element simulation, multi-scale and multi-field coupled modelling, impact dynamics, composite mechanics, extreme service performance and life.
Concurrent Academic Posts:
He is a young editorial board member of SCI/EI journals such as Journal of Aeronautical Materials, Journal of Materials Engineering, Journal of Central South University and J. Cent. South. Univ., the guest editor of Aerosp., Front. in Mech. Eng. and other SCI/EI journals, a member of the Mechanical Engineering Expert Committee for VISER Database, a member of the Chinese Society of Theoretical and Applied Mechanics and Chinese Society for Composite Materials, well as the review expert of more than 20 domestic and international academic journals, such as Composites Science and Technology, International Journal of Mechanical Sciences, Journal of Sandwich Structures and Materials, Frontiers of Mechanical Engineering, Composites Part B: Engineering, Thin-Walled Structures, Composite Structures, ACS Applied Materials & Interfaces, Defence Technology, International Journal of Damage Mechanics, Biomaterials Science, Acta Materiae Compositae Sinica and Journal of Mechanical Engineering.
Scientific Research Programs:
General program of China Postdoctoral Science Foundation (first-class grant, mechanical engineering), Research on multi-scale dynamic constitutive damage model of carbon/aramid fiber composite materials under humid-thermal coupling environment, 2022/12-2024/11. (PI, under study)
General program of the Natural Science Foundation for Fundamental and Applied Basic Research of Guangdong Province, Service performance decay mechanism and full-life controllable design of HFRP pressure-resistant shells in extreme deep-sea environments, 2023/01-2025/12. (PI, under study)
Jinsheng (Guangdong-Shenzhen) Joint Fund Program of the Fundamental and Applied Basic Research Foundation of Guangdong Province, Impact energy absorption mechanism and service life prediction of CFRP/KFRP hybrid thin-walled structures under wet-thermal-mechanical cycling service environment, 2022/11-2025/10. (PI, under study)
Research program for Young Top Talents, Research on structural design and 3D printing of continuous fiber composites, 2021/05-2026/04. (PI, under study)
Program supported by the State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body: Microcrack repair and residual shear strength of CFRP/aluminum alloy bonded joints after impact, 2021/12-2023/10. (PI, under study)
Hubei Postdoctoral Innovation Research Project: Impact resistance of interlayer hybrid fiber composite energy absorbing structure, 2021/08-2023/07. (PI, under study)
Subproject of National Key R&D Program: Application demonstration of internal fine runner additive manufacturing in space propulsion field, 2022/10. (Participant, under study)
Hubei Sanjiang Aerospace Honglin Exploration and Control Co., Ltd. Development and validation of 3D printing based ultra-high buffer protection metal composite structure, 2021/05-2022.04. (Participant, under study)
Postgraduate Research Innovation Project of Hunan Province: Study on multi-scale impact damage of composites in humid and hot complex environment, 2018/10-2020/09. (PI, concluded)
General Program of National Natural Science Foundation of China: Research on the multi-scale energy absorption mechanism of CFRP thin-walled structure for carrier equipment under alternating hygrothermal load, 2021/01-2024/12. (Key participant, under study)
Innovative Research Group Program of National Natural Science Foundation of China: Automotive crash safety analysis and optimal design, 2018/01-2022/12. (Key participant, under study)
Youth Program of National Natural Science Foundation of China: Research on the damage mechanism of the energy-absorbing structure of flight vehicle composites, 2015/10-2017/09.(Key participant, concluded)
Cooperative Research Project of Chinese Aeronautical Establishment: Study on the post-buckling characteristics of thermoplastic composite structures for civil aircraft, 2019/01-2019/12. (Participant, concluded)
Project of China Aircraft Strength Research Institute: Research on the modeling and analysis methods of typical metal composite connection structures, 2019/01-2022/12. (Participant, under study)
Australian Research Council, Predicting strength of porous materials: A microstructure-based approach, 2018/01-2020/12. (Participant, concluded)
Academic Achievements:
Hongyong Jiang#1,*, Xuefeng Liu#1(co-first author), Shulan Jiang, Yiru Ren. Hybrid effects on the flexural behavior of hybrid fiber composites by interactive failure mechanisms: carbon/Kevlar, carbon/glass, carbon/glass/Kevlar. Aerospace Science and Technology, 2023, 133:108105. (IF=5.457, CAS 1)
Hongyong Jiang, Yiru Ren*. CFRP-patching enhancement on open-hole CFRP panel with micro/nanofillers-modified adhesive interface: Experimental and numerical simulation. Composites Science and Technology, 2022, 218:109180. (IF=9.879, CAS 1)
Hongyong Jiang, Fei Cheng, Yunsen Hu, Xiaozhi Hu*, et al. Micro-mechanics modeling of compressive strength and elastic modulus enhancement in unidirectional CFRP with aramid pulp micro/nano-fiber interlays. Composites Science and Technology, 2021, 206:108664. (IF=9.879, CAS 1)
Yiru Ren*, Hongyong Jiang, Binhua Gao, et al. A progressive intraply material deterioration and delamination based failure model for the crashworthiness of fabric composite corrugated beam: Parameter sensitivity analysis. Composites Part B: Engineering, 2018, 135:49-71. (IF=11.322, CAS 1)
Hongyong Jiang, Yihao Wang, Yiru Ren*. Controllable energy-absorption behaviors of the perforated CFRP tube with an adhesively bonded CFRP patch. Thin-Walled Structures, 2022. (IF=5.881, CAS 1)
Jiang Hongyong, Ren Yiru*,Yuan Xiuliang, et al. Crash worthiness of composite corrugated beam based on nonlinear progressive damage model. Acta Aeronautica ET Astronautica Sinica, 2017, 38(6):22717. (EI)
Ren Yiru, Jiang Hongyong* (corresponding), Jin Qiduo, et al. Crash worthiness of bio-inspired auxetic reentrant honeycomb with negative Poisson’s ratio. Acta Aeronautica ET Astronautica Sinica, 2020. (EI)
Hongyong Jiang, Yi Ji, Yunsen Hu, Xiaozhi Hu*, Yiru Ren*. Interfacial design and flexural property of CFRP/aluminum-honeycomb sandwich with Aramid-pulp micro/nano-fiber interlays. Composite Structures, 2022. (IF=6.603, CAS 1)
Hongyong Jiang, Yiru Ren*, Qiduo Jin, et al. Flexural performances of fiber face-sheets/corrugated core sandwich composite structures reinforced by horizontal stiffeners. International Journal of Mechanical Sciences, 2019, 168:105307. (IF=6.772, CAS 1)
Hongyong Jiang, Yiru Ren*, Xiaochuan Liu, et al. Enhancing residual energy-absorption of perforated CFRP tube by a critical transition of failure mechanism. Composite Structures, 2020, 253:112811. (IF=6.603, CAS 1)
Hongyong Jiang, Yiru Ren*, Zhihui Liu, et al. Low-velocity impact resistance behaviors of bio-inspired helicoidal composite laminates with non-linear rotation angle based layups. Composite Structures, 2019, 214:463-475. (IF=6.603, CAS 1)
Hongyong Jiang, Yiru Ren*, Jinwu Xiang, et al. Numerical investigation on links between the stacking sequence and energy absorption characteristics of fabric and unidirectional composite sinusoidal plate. Composite Structures, 2017, 171:382-402. (IF=6.603, CAS 1)
Hongyong Jiang, Yiru Ren*, Jinwu Xiang, et al. Design of novel plug-type triggers for composite square tubes: enhancement of energy-absorption capacity and inducing failure mechanisms. International Journal of Mechanical Sciences, 2017, 131-132:113-136. (IF=6.772, CAS 1)
Hongyong Jiang, Yiru Ren*. Crashworthiness and failure analysis of steeple-triggered hat-shaped composite structure under the axial and oblique crushing load. Composite Structure, 2019, 229:111375. (IF=6.603, CAS 1)
Hongyong Jiang, Yiru Ren*, Zhihui Liu. Micro- and macro-scale prediction for axial cutting machining behaviors of 2D tri-axially braided composites. International Journal of Mechanical Sciences, 2019, 156:1-13. (IF=6.772, CAS 1)
Yiru Ren, Hongyong Jiang*(corresponding), Zhihui Liu. Evaluation of double- and triple-coupled triggering mechanisms to improve crashworthiness of composite tubes. International Journal of Mechanical Sciences, 2019, 157:1-12. (IF=6.772, CAS 1)
Hongyong Jiang, Yiru Ren*, Qiduo Jin. A novel synergistic multi-scale modeling framework to predict micro- and meso-scale damage behaviors of 2D triaxially braided composite. International Journal of Damage Mechanics, 2021. (IF=5.092, CAS 2)
Hongyong Jiang, Yiru Ren*, Qiduo Jin, et al. Crashworthiness of novel concentric auxetic reentrant honeycomb with negative Poisson's ratio biologically inspired by coconut palm. Thin-Walled Structures, 2020, 154:106911. (IF= 5.881, CAS 1)
Yiru Ren, Yabin Deng, Hongyong Jiang *(corresponding). On core reinforcement design for improving the flexural energy-absorption of corrugated sandwich composite structure. Chinese Journal of Aeronautics, 2020. (IF=4.061, CAS 1)
Hongyong Jiang, Yiru Ren*, Zhihui Liu. Numerical prediction for effects of fiber orientation on perforation resistance behaviors of patch-repaired composite panel subjected to projectile impact. Thin-Walled Structures, 2019, 144:106325. (IF=5.881, CAS 1)
Hongyong Jiang, Yiru Ren*, Zhihui Liu, et al. Multi-scale analysis for mechanical properties of fiber bundle and damage characteristics of 2D triaxially braided composite panel under shear loading. Thin-Walled Structures, 2018, 132:276-286. (IF=5.881, CAS 1)
Hongyong Jiang, Yiru Ren*, Binhau Gao, Jinwu Xiang. Research on the progressive damage model and trigger geometry of composite waved beam to improve crashworthiness. Thin-Walled Structures, 2017, 119:531-543. (IF=5.881, CAS 1)
Hongyong Jiang, Yiru Ren*, Jinwu Xiang. A numerical study on the energy-absorption of fibre metal laminate conical frusta under quasi-static compression loading. Thin-Walled Structures, 2018, 124:278-290. (IF=5.881, CAS 1)
Hongyong Jiang, Yiru Ren*, Zhihui Liu. Microscale finite element analysis for predicting effects of air voids on mechanical properties of single fiber bundle in composites. Journal of Materials Science, 2019, 54(2):1363-1381. (IF=4.682, CAS 3)
Hongyong Jiang, Yiru Ren*, Songjun Zhang, et al. Multi-scale finite element analysis for tension and ballistic penetration damage characterizations of 2D triaxially braided composite. Journal of Materials Science, 2018, 53(14):10071-10094. (IF=4.682, CAS 3)
Hongyong Jiang, Yiru Ren*, Songjun Zhang, et al. Damage and perforation resistance behaviors induced by projectile impact load on bonding-patch repaired and scarf-patch repaired composite laminates. International Journal of Damage Mechanics, 2018, 28(4):502-537. (IF=5.092, CAS 2)
Hongyong Jiang, Yiru Ren*, Zhihui Liu, et al. Evaluations of failure initiation criteria for predicting damages of composite structures under crushing loading. Journal of Reinforced Plastics and Composites, 2018, 37(21):1279-1303. (IF=3.71, CAS 3)
Yiru Ren, Ningcong Wang, Hongyong Jiang*(corresponding), et al. Numerical evaluation of planar compression performances of composite sandwich panel with X-, Y-, and A-shaped core. Journal of Composite Materials, 2020. (IF=2.591, CAS 4)
Hongyong Jiang, Yiru Ren*, Jianqiang Zheng. Gradient degraded material-induced trigger to improve crashworthiness of composite tubes in a controlled manner. Journal of Reinforced Plastics and Composites, 2019, 39(1-2):60-77. (IF=3.71, CAS 3)
Yiru Ren*, Hongyong Jiang, Wenyuan Ji, et al. Improvement of progressive damage model to predicting crashworthy composite corrugated plate. Applied Composite Materials, 2018, 25(1):45-66. (IF=2.181, , CAS 3, high citation)
Songjun Zhang, Hongyong Jiang, Yiru Ren*, et al. Multi-scale progressive damage model for analyzing the failure mechanisms of 2D triaxially braided composite under uniaxial compression loads. Applied Composite Materials, 2018, 25(4):921-938. (IF=2.181, CAS 3)
Binhua Gao, Yiru Ren*, Hongyong Jiang, et al. Sensitivity analysis-based variable screening and reliability optimisation for composite fuselage frame crashworthiness design. International Journal of Crashworthiness, 2020. (IF=2.055, CAS 4)
Yiru Ren*, Zhihui Liu, Hongyong Jiang, et al. A novel multi-stage stacked triggering method to induce progressive failure behaviors of composite corrugated plate. Applied Composite Materials, 2020, 27(1):55-74. (IF=2.181, CAS 3)
Xiaochuan Liu, Hongyong Jiang, Yiru Ren*, et al. Effects of global and local ply-reinforcements of critical components on crush performances of 2D tri-axially braided CFRP J-shaped fuselage frame. International Journal of Crashworthiness, 2020. (IF=2.055)
Yiru Ren*, Songjun Zhang, Hongyong Jiang, et al. Meso-scale progressive damage behavior characterization of triaxial braided composites under quasi-Static tensile load. Applied Composite Materials, 2018, 25:335-352. (IF=2.181, CAS 3)
Zhihui Liu, Hongyong Jiang, Yiru Ren*, et al. Crashworthiness and failure analysis of steeple-triggered hat-shaped composite structure under the axial and oblique crushing load. Polymer Composites, 2019, 40(5):1708-1717. (IF=2, CAS 3)
Qiduo Jin, Yiru Ren*, Hongyong Jiang. A higher-order size-dependent beam model for nonlinear mechanics of fluid-conveying FG nanotubes incorporating surface energy. Composite Structures, 2021 269, 114022. (IF=6.603, CAS 1)
Yabin Deng, Yiru Ren*, Hongyong Jiang. Bionic-bamboo design for enhancing the crashworthiness of composite tube with groove trigger subjected to oblique load. International Journal of Mechanical Sciences, 2021, 206:106635. (IF=6.772, CAS 1)
Deng Yabin, Ren Yiru*, Jiang Hongyong. Oblique crushing failure behaviors of composite energy-absorbing circular tube under the semi-circular cavity triggering mechanism. Acta Materiae Compositae Sinica, 2022, 39(4): 1796-1804. (EI)
Cheng Fei*, Jiang Hongyong. Damage resistance and residual compressive strength of carbon fiber reinforced plastic optimized by aramid pulp. Acta Materiae Compositae Sinica, 2021. (EI)
Yiru Ren*, Tao Ran, Hongyong Jiang. Energy-absorption assessments of perforated CFRP tube induced by inward-splaying trigger with different trigger radius. Thin-walled Structures, 2021, 167:108236. (IF=5.881, CAS 1)
Jin Qiduo, Ren Yiru*, Hu Xuan, Jiang Hongyong. Low-velocity impact responses of FG-GRC sandwich beams with viscoelastic cores. Chinese Journal of Theoretical and Applied Mechanics, 2020. (EI)
Qiduo Jin, Yiru Ren*, Fan Peng, Hongyong Jiang. Imperfection sensitivity of free vibration of symmetrically/anti-symmetrically laminated FRC beams in thermally pre-and post-buckling equilibrium states. Acta Astronautica, 2020, 173:240-251. (IF=2.413, CAS 2)
Tao Ran, Yiru Ren, Hongyong Jiang. Design and assessments of gradient chamfer trigger for enhancing energy-absorption of CFRP square tube. Applied Composite Materials, 2022: 1-20.
Rui Lv, Yiru Ren, Zhihui Liu, Hongyong Jiang. Energy absorption characteristics and failure mechanism of fabric composite channel section structure under axial crushing Loading. Journal of Aerospace Engineering, 2022, 35(4): 04022046.
Yabin Deng, Hongyong Jiang, Yiru Ren. Low-velocity impact resistance behaviors of bionic double-helicoidal composite laminates. International Journal of Mechanical Sciences, 2023. (IF=6.772, CAS 1)
Academic Conferences:
Jiang Hongyong, Ren Yiru. Analysis of the effect of fiber filament fracture defects on the mechanical properties of fiber bundles based on micro-scale methods. The 20th National Conference on Composite Materials (NCCM-20th), Dalian, China, 2018.
Jiang Hongyong, Ren Yiru. Damage penetration resistance behavior of composite laminates with bullet impact load-induced patching and filler repair. Chinese Congress of Theoretical and Applied Mechanics, Beijing, China, 2017.
Jiang Hongyong, Ren Yiru. Enhanced design of the flexural performance of fiber panel/corrugated sandwich composite structure. Chinese Congress of Theoretical and Applied Mechanics, Hangzhou, China, 2019.
Hongyong Jiang, Yiru Ren. Evaluation of double- and triple-coupled triggering mechanisms to improve crashworthiness of composite tubes. International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (ICOMP), Wuhan, China, 2019.
Hongyong Jiang, Yiru Ren. Axial energy absorption characteristics of multi-concentric cell honeycomb structures biologically inspired by palm tree body. International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (ICOMP), Wuhan, China, 2018.
Hongyong Jiang, Yiru Ren. Research on the failure model and trigger geometry of composite waved beam to improve crashworthiness. International Conference on Composites or Nano Engineering (ICCE-24th), Haikou, China, 2016.
Invention Patents:
Ren Yiru, Jiang Hongyong, Jin Qiduo. A corrugated sandwich composite structure based on coupled deformation failure mechanism. 2021-8-4, China, 202110891136.6.
Ren Yiru, Ran Tao, Jiang Hongyong. An interlayer toughened composite material and its preparation method. 2021-11-9, China, 202111323554.1.
Ren Yiru, Yang Hongyuan, Jiang Hongyong, JinQiduo. A composite corrugated sandwich structure based on gradient reinforcement trigger. 2021-10-27, China, 202111252463.3.
Ren Yiru, Ran Tao, Jiang Hongyong. A triple-coupling trigger structure and its application. 2021-11-9, China, 202111318153.7.
Awards and Honors:
National Scholarship for Doctoral Students, Ministry of Education, 2020.
National Scholarship for Doctoral Students, Ministry of Education, 2019.
National Scholarship for Doctoral Students, Ministry of Education, 2018.
Outstanding Doctoral Scholarship of Hunan University, Hunan University, 2018.
Outstanding Doctoral Scholarship of Hunan University, Hunan University, 2017.
Baosteel Outstanding Student Award, Baosteel Education Foundation,2020
“Top Ten Tellhow Stars” Scholarship, Hunan University and Tellhow, 2018.
Outstanding Doctoral Student "Model" of Hunan Province, Hunan Provincial Department of Education, 2020.
Outstanding Doctoral Student of Hunan University, Hunan University, 2020.
Outstanding Doctoral Student of Hunan University, Hunan University, 2019.
Outstanding Doctoral Student of Hunan University, Hunan University, 2018.
Outstanding Doctoral Graduate of Hunan Province, Hunan Provincial Department of Education, 2021
Outstanding Master Dissertation of Hunan Province, Hunan Provincial Department of Education, 2019.
Outstanding Master Dissertation of Hunan University, Hunan University, 2017.
Outstanding Master Degree Candidate of Hunan University, Hunan University, 2017.