Sex: |
Male |
Date of birth: |
Aug. 1962 |
Nationality: |
Han |
Political status: |
Mass |
Education level: |
Postgraduate |
Degree: |
Ph. D |
Graduated from: |
China University of Geosciences (Wuhan) |
Title: |
Professor |
Native of Xiaogan, Hubei Province, postgraduate qualification, Ph. D, professor, master supervisor.
Vice-chairman of Metalworking Teaching Committee of Hubei Association of Higher Education, director of Hubei Mechanical Engineering Society, executive director of Hubei Mechanical Design and Transmission Society. He is mainly engaged in the teaching and scientific research of mechanical engineering, and teaches “Frontiers of Mechanical Engineering” for postgraduate students and “Theory of Machines and Mechanisms”, “An Introduction to Mechanical Engineering”, “Microcontroller Principle and Interface Technology”, “Metal Materials and Heat Treatment” and other course for undergraduate students. He has published more than 10 teaching research papers, is the person in charge of “Metal Materials and Heat Treatment” (the excellent course of Hubei Province), and has won one first prize and one second prize for teaching achievements of colleges and universities in Hubei Province. Under his guidance, the students have won 2 Excellent Master Theses of Hubei Province, 10 Excellent Bachelor Theses of Hubei Province and 1 National Third Prize in Challenge Cup. His main research interests are high-temperature and ultra-high pressure experimental equipment and instruments, electromechanical integration, geological engineering equipment and instruments in extreme environment. He has successively presided over and participated in more than 30 scientific research programs, published more than 50 scientific research papers, won more than 30 national patents and software copyrights, won one second prize for progress in science and technology of Hubei Province, and one third prize for excellent natural science papers in Hubei Province.
Contact information
E-mail: raojianh@cug.edu.cn; QQ: 909123700
Address: School of Mechanical Engineering and Electronic Information, China University of Geosciences (Wuhan)
Postal code: 430074
Award-winning achievements (at provincial level)
Name of achievements |
Category and grade of awards |
Ranking |
1. Teaching research and practice based on flexible concept for knowledge synthesis and practical innovation ability training of mechanical and electrical college students |
First Prize for Teaching Achievements of Colleges and Universities in Hubei Province, 2013 |
Second |
2. Research on key technologies of numerical control flame and plasma cutting machine and the development of series products |
Second Prize for Progress in Science and Technology of Hubei Province, 2011 |
Second |
3. Reform of machinery foundation serial courses and the application of CAI in experimental teaching |
Second Prize for Teaching Achievements of Colleges and Universities in Hubei Province, 2001 |
Second |
4. Computer automatic generation of structural decomposition and motion analysis of planar linkage structure |
Third Prize for Excellent Academic Papers on Natural Science of Hubei Province, 1998 |
First |
Awards of students (above the provincial level)
Name of achievements |
Student (team) |
Category and grade of awards |
1. CAD/CAM system of gemstone grinding robot |
Xiangnan Li |
2014 Excellent Master Theses of Hubei Province |
2. Design and experimental study of digital hydraulic ultra-high pressure generation unit |
Xiaokang Liu |
2013 Excellent Master Theses of Hubei Province |
3. Research on automatic gem grinder |
Shuangshuang Yang |
2015 Excellent Bachelor Theses of Hubei Province |
4. Rheometer cooling device control system |
Peng Cheng |
2014 Excellent Bachelor Theses of Hubei Province |
5. Development of pulley line slip detection device and slip test analysis |
Zhipeng Li |
2013 Excellent Bachelor Theses of Hubei Province |
6. Development of Kidd FIO automatic mirror mask machine |
Changing Li |
2012 Excellent Bachelor Theses of Hubei Province |
7. Mechanical structure design of micro automatic sampling drilling machine |
Guanglong Xu |
2011 Excellent Bachelor Theses of Hubei Province |
8. Design of the experimental platform for impact loading of drill rod |
Meijun Zhang |
2010 Excellent Bachelor Theses of Hubei Province |
9. Design and test of a new vibration exciter for hydraulic vibration drilling |
Xing Kuang |
2009 Excellent Bachelor Theses of Hubei Province |
10. Development of a new variable frequency electromagnetic water treatment system |
Siwen Zhang |
2009 Excellent Bachelor Theses of Hubei Province |
11. Numerical controlled cylindrical wire mesh welder |
Dongmei Zhou |
2009 Excellent Bachelor Theses of Hubei Province |
12. Development of marking machine control system based on MPC02 |
Fengchun He |
Second Prize of 2008 Excellent Bachelor Theses of Hubei Province |
13. Pulse-jet assisted vacuum cleaner |
Yideng Liu |
First Prize in 2008 Machinery Innovative Design Competition of Hubei Province |
14. Layered in situ monitoring well system of groundwater |
Haodeng Zheng |
Third Prize in 2015 the 14th “Challenge Cup” |
15. Hillside pace car |
Dilei Liu, et al |
Second Prize in 2010 Machinery Innovative Design Competition of Hubei Province |
16. Security escape window |
Yubing Wen, et al |
Second Prize in 2010 Machinery Innovative Design Competition of Hubei Province |
National patents and software copyrights
Patent title |
Patent No. |
Date of authorization |
1) Variable frequency water treatment control system based on LABVIEW |
ZL201010231885.8 |
2012.03.28 |
2) A method and a device of electronically controlled fluid shock excitation applied to vibration cutting |
ZL200910061800.3 |
2011.12.14 |
3) Tunnel vault detection device |
ZL201210245314.9 |
2014.12.10 |
4) Tunnel sidewall detection device |
ZL201210245631.0 |
2014.12.10 |
5) A multi-channel temperature recorder |
ZL201120042448.1 |
2011.10.05 |
6) A faucet device for lab rock sample drilling machine |
ZL201020229391.1 |
2011.01.26 |
7) A pyrophyllite sawing machine |
ZL201020656677.8 |
2011.06.22 |
8) A servo pressure generator |
ZL201020648823.2 |
2011.06.22 |
9) Grinding robot |
ZL201120012060.7 |
2011.08.24 |
10) A linear reciprocating sawing device |
ZL201120497619.X |
2012.08.08 |
11) A miniature automatic sampling drill |
ZL201120480602.3 |
2012.07.11 |
12) A servo ultra-high pressure supercharging device |
ZL201020594559.9 |
2011.08.24 |
13) An anti-impact wear protective device for GPR antenna |
ZL201420041050.X |
2014.06.25 |
14) A flat folding iron horse device with rotating feet |
ZL201420047360.2 |
2014.07.02 |
15) A double-balanced extended hydraulic pumping unit |
ZL201420361842.5 |
2014.11.05 |
16) Roof camera control device for police vehicles |
ZL201420537453.3 |
2014.11.25 |
17) Touch sensing device for railway tunnel contact grid |
ZL201320670551.X |
2014.04.09 |
18) Control system software of cylinder piston type high temperature and high pressure experimental device |
2011SR019926 |
2011.04.13 |
19) System software for secondary development system of DTH bits /bore bits V1.0 |
2013SR145613 |
2013.12.13 |
20) Control system software of gem grinding robot |
2012SR011564 |
2012.02.21 |
21) Tunnel section measurement system software V1.0 |
2014SR129640 |
2014.05.10 |
22) High viscosity liquid cooling device for high temperature and high pressure rheometer |
CN201310254578 |
2015.03.04 |
23) A method and a device of fluid shock excitation applied to vibration cutting |
ZL200810048802.4 |
2010.02.10 |
24) An automatic gem polishing mill |
CN201520655615 |
2015.12.09 |
25) A remote monitoring system for high temperature and high pressure rheometer |
CN201520405976 |
2015.09.16 |
26) A split-type cooling device for high temperature and high pressure rheometer |
CN201520398260 |
2015.10.14 |
27) A contact detection device for the contact net rack of railway tunnel |
CN201520333010 |
2015.09.02 |
28) A multi-axis linkage gem polishing and grinding device |
CN201520332238 |
2015.05.21 |
29) A diamond fan pattern grinding plate for jewelry grinding |
CN201520281918 |
2015.09.02 |
30) Cooling device of high temperature vessel |
CN201520217049 |
2015.08.05 |
31) Piston type groundwater sampler |
CN201420818527 |
2015.04.08 |
32) An automatic heating, heat preservation and feeding device for cubic press |
CN201410235769 |
2015.10.28 |
33) Automatic feeding manipulator of diamond cubic press |
CN201410217812 |
20151014 |
34) An experimental device and method for testing the skid characteristics of rope wheel |
CN201310578672 |
2015.11.04 |
